TODAY IS 2020-2-23

Welcoome To Supersafe International Industry CO.,Limited

Product Name: Tanda Conventioanl Reflective Laser Beam Detector   
Name: Tanda Conventioanl Reflective Laser Beam Detector Model: TX6701 
Attestation: CE Type: Reflective Beam Smoke Detector 

The infrared linear reflex beam smoke detector, being designed for fire prevention in the open area, is a long interval one and used with the fire alarm controller. The detector is made up of the combination unit of the emitter and the receiver as well as the reflecting mirror. The signal issued by the emitter enters into the receiver after reflection by t

he reflector.

The Conventional Reflective Beam Detector has built in Laser beam pointing and Digital guide display for real

user friendly alignment method. The Laser beam pointing accurately point the exact location where to mount

mirror and with additional digital guide display allows to monitor and guide on the actual light intensity between

the mirror and detector which cannot be seen by our naked eye making it more easy and convenient in

alignment commissioning.

The beam detector has four adjustable operational range of between 8 to 20, 40, 70 and 100 meters beside

with three adjustable sensitivity setting ranges from 2.6dB to 4.8dB to meet the specific environmental

requirement. The detector works on the principle of reflective infrared beam obscuration. Used in conjunction

with a reflectors, it will notify the fire alarm panel when the infrared beam is obscured by smoke. Secure and

quick communication through the onboard processor enables the detector to make its own decision and drift

compensation resulting in greater automation.

The detector is ideal for use high ceiling and wide areas such as warehouses, large storages, shopping malls,

leisure centres, exhibition halls, hotel lobbies, printing houses, garment factories, museums and prisons, as well

as places where slight smoke particles or corrosive gas exist.

Feature and Benefits

1. Manufacture in compliance with EN54-12

2. Hassle free alignment, built with digital guide display and laser beam pointing

3. Employ single-ended design through reflective mirror.

4. Four ranges wide monitoring from 8-100 meters via encoder

5. Three users programing sensitivity adjustment

6. Built-in microprocessor

7. Self-diagnosis function can monitor for internal faults

8. Automatic compensation for factors weakening received signals, such as dust contamination, positional

movement and ageing of the transmitter

9. Fire and Fault interfacing relays

10. Attractive and pleasing appearance

11. Real User friendly alignment method


Copyright 2001 © Supersafe International Industry CO.,Limited
All Rights Reserved.